*********************************
There is now a CONTENT FREEZE for Mercury while we switch to a new platform. It began on Friday, March 10 at 6pm and will end on Wednesday, March 15 at noon. No new content can be created during this time, but all material in the system as of the beginning of the freeze will be migrated to the new platform, including users and groups. Functionally the new site is identical to the old one. webteam@gatech.edu
*********************************
THE SCHOOL OF MATERIALS SCIENCE AND ENGINEERING
GEORGIA INSTITUTE OF TECHNOLOGY
Under the provisions of the regulations for the degree
DOCTOR OF PHILOSOPHY
on Friday, April 2, 2021
11:00 AM
via
BlueJeans Video Conferencing
https://bluejeans.com/1297436945
will be held the
DISSERTATION DEFENSE
for
Yi Li
“Investigation of Processing-Structure-Property Relations in Vapor Phase Modified Cellulosic Materials”
Committee Members:
Prof. Mark Losego, Advisor, MSE
Prof. Robert Moon, MSE
Prof. Christopher Luettgen, ChBE
Prof. Meisha Shofner, MSE
Prof. Kyriaki Kalaitzidou, ME
Abstract:
Cellulosic materials are widely used in our daily lives for paper products and functional polymers. The cellulose molecule has a high density of hydroxyl groups, which causes strong intra-/inter- fiber hydrogen bonding. These abundant hydroxyl groups make cellulose super-hydrophilic and difficult to disperse or dissolve in nonpolar organic solvents or polymers. The traditional methods to functionalize cellulose is either surface modification or regeneration. Vapor phase modification of cellulose has gained interest in recent years. Instead of using liquid phase precursor solutions, vapor phase processing uses gas molecules as precursors to realize surface coatings with better uniformity and consistency amongst batches. Atomic layer deposition (ALD) technique can be conducted at relative lower reaction temperatures (25 – 300) and realize a conformal coating on substrates with high aspect ratios.
Reported literatures on ALD modified cellulose are more focus on functional coatings, replicas, physicochemical property of new generated materials, while less focus has been given to studying the reaction mechanisms and underlying physics of the physicochemical property changes. This work focuses on the study of the initial cycle’s reaction mechanism and process-structure-property relation for TMA and water reacting with cellulose substrates. Different cellulose products (chromatography paper, cotton ball and cellulose free-standing film made from cellulose nanofibrils) were investigated for their corresponding properties after ALD reaction. Specifically, this work contains three sections, which are (1) Investigating the heat stimulated surface wettability transition after “low” cycle ALD reaction on cellulosic materials, then apply different wetting models to explain this wettability transition. (2) Investigating the reaction mechanism and resulting physicochemical property difference for low cycle of TMA and water ALD reacted cellulose nanofilms. (3) Developing new ALD processing recipes to modify cellulose nanofilms by exploring the effect of the TMA exposure time to alter the cellulose’s chemistry and physical microstructure.
This study provides a novel insight of surface property and mechanical property control for cellulosic materials through ALD process parameters development and will offer guideline information for future process development and substrate selection to achieve designed material property.
