*********************************
There is now a CONTENT FREEZE for Mercury while we switch to a new platform. It began on Friday, March 10 at 6pm and will end on Wednesday, March 15 at noon. No new content can be created during this time, but all material in the system as of the beginning of the freeze will be migrated to the new platform, including users and groups. Functionally the new site is identical to the old one. webteam@gatech.edu
*********************************
THE SCHOOL OF MATERIALS SCIENCE AND ENGINEERING
GEORGIA INSTITUTE OF TECHNOLOGY
Under the provisions of the regulations for the degree
DOCTOR OF PHILOSOPHY
on Friday, December 4, 2020
1:00 PM
via
BlueJeans Video Conferencing
https://bluejeans.com/240364006
will be held the
DISSERTATION PROPOSAL DEFENSE
for
Doyoub Kim
“Designing a Novel Electrode Structure with Pore Distribution for Thick Li-ion Battery Electrodes”
Committee Members:
Prof. Gleb Yushin, Advisor, MSE
Prof. Faisal Alamgir, MSE
Prof. Ting Zhu, ME/MSE
Prof. Seungwoo Lee, ME
Prof. Alexander Alexeev, ME
Abstract:
Development of lithium-ion batteries (LIBs) had been instrumental for the broad use of sophisticated mobile electronic devices. Nowadays LIBs have also become the very foundation of electric vehicles (EV) and energy storage systems (ESS) for electric grid due to LIBs' unprecedented combination of high volumetric energy and power densities, reliable operation, and relatively low cost. However, as the conventional LIB materials reach their performance limits, further improvements in LIB performance and reduction in LIB costs need to come either from novel materials development or from improved LIB manufacturing. In the latter case, increasing areal electrode capacity loadings from 3-4 mAh/cm2 to 5-7 mAh/cm2 or higher values without significant sacrifices in the volumetric electrode capacity or charge rates becomes critical for volumetric energy density improvement beyond 600-700 Wh/L, gravimetric energy density improvements beyond 250 Wh/L and meaningful cost savings, which are critically important for the broad adoption of renewable energy technologies. Unfortunately, higher areal capacities and thus thicker or dense electrodes may slow down the transport of ions during charge and discharge, thereby reducing rate performance and capacity utilization in realistic operating conditions, increasing cell resistance and ultimately shortening LIB cycle life.
For my Ph.D. project I propose to alter the distribution of pores in the conventionally produced high-capacity loading LIB electrodes by both micro-mechanical means and laser-induced post-treatments and systematically study the impact of pore modifications on the average electrodes' tortuosity and electrochemical properties. The new fundamental knowledge to be gained in the proposed study will help to establish guiding principles for the advanced fabrication techniques to fine-tune the size, shape, and distribution of pores within electrodes. As a result, LIB manufacturers should be able to dramatically accelerate ion transport and enable fast charging, while simultaneously increasing LIB energy density and reducing LIB fabrication costs.
