*********************************
There is now a CONTENT FREEZE for Mercury while we switch to a new platform. It began on Friday, March 10 at 6pm and will end on Wednesday, March 15 at noon. No new content can be created during this time, but all material in the system as of the beginning of the freeze will be migrated to the new platform, including users and groups. Functionally the new site is identical to the old one. webteam@gatech.edu
*********************************
Title: Machine Learning for Automating Millimeter-Wave Electromagnetic Designs
Committee:
Dr. Andrew Peterson, ECE, Chair , Advisor
Dr. John Cressler, ECE
Dr. Benjamin Klein, ECE
Dr. Gregory Durgin, ECE
Dr. Thanh Nguyen, Univ of Oregon
Abstract: This dissertation proposes a general class of solution and Machine Learning (ML) techniques to support the designs of several critical Electromagnetic (EM) structures at mm-wave frequency ranges, for which the main applications are to directly address the emerging power and efficiency challenges of the next generation of wireless communication. Starting from the coupled line theory, we theoretically propose a common solution for Impedance Transforming Baluns, Power Combiners, Out-Phasing circuits, and Doherty networks, which we refer as the BCOD structure. The main contribution of this dissertation is to develop Machine Learning (ML) techniques that, within the computational time of seconds, can fully automate EM designs of the BCOD network that achieves the lowest metal loss, in which we demonstrated the proposed ML approaches on various on-chip metal stacks for a wide range of electrical specifications. Notably, optimizing for the lowest metal loss is a challenging problem, and to the best of our knowledge, we are not aware of any prior techniques that can systematically do so. Importantly, the application of our proposed ML approaches can go beyond the task of automating EM structures. Serving as a new tool for bigger optimization loops, the ML techniques can theoretically answer several challenging, abstract, and high-level questions for mm-wave designs, such as the calculation of the optimum transistor sizes, or the derivation of the rule of thumb between device sizes and mm-wave frequencies.
