*********************************
There is now a CONTENT FREEZE for Mercury while we switch to a new platform. It began on Friday, March 10 at 6pm and will end on Wednesday, March 15 at noon. No new content can be created during this time, but all material in the system as of the beginning of the freeze will be migrated to the new platform, including users and groups. Functionally the new site is identical to the old one. webteam@gatech.edu
*********************************
Summary Sentence: Join Materials Science and Engineering as they present Dr. Anthony Rollet from Carnegie Mellon University.
Full Summary: No summary paragraph submitted.
Anthony Rollett
Abstract:
3D printing of metals has advanced rapidly in the past decade and is used across a wide range of industry. Many aspects of the technology are considered to be well understood in the sense that validated computer simulations are available. At the microscopic scale, however, more work is required to quantify and understand defect structures, which affect fatigue resistance, for example. Synchrotron-based 3D X-ray computed microtomography (µXCT) was performed at the Advanced Photon Source on a variety of AM samples using both laser (SLM) and electron beam (EBM) powder bed; this showed systematic trends in porosity. Optical and SEM characterization of powders used in additively manufacturing (AM) reveals a variety of morphologies and size distributions. Computer vision (CV), as a subset of machine learning, has been successfully applied to classify different microstructures, including powders. The power of CV is further demonstrated by application to detecting and classifying defects in the spreading in powder bed machines, where the defects often correspond to deficiencies in the printed part. In addition to the printed material, a wide range of powders were measured and invariably exhibited porosity to varying degrees. Outside of incomplete melting and keyholing, porosity in printed parts is inherited from pores or bubbles in the powder. This explanation is reinforced by evidence from simulation and from dynamic x-ray radiography (DXR), also conducted at the APS. DXR has revealed a wide range of phenomena, including void entrapment (from powder particles), keyholes (i.e., vapor holes) and hot cracking. Keyhole depth is linearly related to the excess power over a vaporization threshold. Concurrent diffraction provides information on solidification and phase transformation in, e.g., Ti-6Al-4V and stainless steel. High Energy (x-ray) Diffraction Microscopy (HEDM) experiments are also described that provide data on 3D microstructure and local elastic strain in 3D printed materials, including Ti-6Al-4V and Ti-7Al. The reconstruction of 3D microstructure in Ti-6Al-4V is challenging because of the fine, two-phase lamellar microstructure and the residual stress in the as-built condition. Both the majority hexagonal phase and the minority bcc phase were reconstructed.
Biography:
I have been a member of the faculty at Carnegie Mellon University since 1995. I am also the Co-Director of the newly formed NextManufacturing Center on additive manufacturing. Previously, I worked for the University of California at the Los Alamos National Laboratory. I spent ten years in management with five years as a Group Leader (and then Deputy Division Director) at Los Alamos, followed by five years as Department Head at CMU (up to 2000). I have been a Fellow of ASM since 1996, Fellow of the Institute of Physics (UK) since 2004 and was chosen to be a Fellow of TMS in 2011. I received the Cyril Stanley Smith Award from TMS in 2014, was elected as Member of Honor by the French Metallurgical Society in 2015 and then became the US Steel Professor of Metallurgical Engineering and Materials Science in 2017. My research group has about ten students and is supported by various Federal agencies, as well as companies such as Boeing and Northrop-Grumman. The focus of my research is on additive manufacturing, the measurement and prediction of microstructural evolution, the relationship between microstructure and properties, with a particular emphasis on three-dimensional effects, texture & anisotropy and the use of synchrotron x-rays.
Reception at 2:30 p.m. outside room L-2.
