*********************************
There is now a CONTENT FREEZE for Mercury while we switch to a new platform. It began on Friday, March 10 at 6pm and will end on Wednesday, March 15 at noon. No new content can be created during this time, but all material in the system as of the beginning of the freeze will be migrated to the new platform, including users and groups. Functionally the new site is identical to the old one. webteam@gatech.edu
*********************************
Title: Three-dimensional Micro Fabrication Technologies for Electronic and Lab-on-chip Applications
Committee:
Dr. Muhannad Bakir, ECE, Chair , Advisor
Dr. Azad Naeemi, ECE
Dr. Oliver Brand, ECE
Dr. Albert Frazier, ECE
Dr. Yogendra Joshi, ME
Abstract:
The density of heterogeneous three-dimensional integrated circuits (3D-ICs) is significantly limited by through-silicon-via (TSV) density and cooling challenges. To enable fine-grain 3D-ICs, high aspect-ratio sub-micron diameter (~920 nm) TSV technology is demonstrated. To address cooling challenges and pronounced thermal wall limits in high-density integrated electronics and 3D-IC technology, a monolithic microfluidic cooling strategy is explored. Specifically, a thermal testbed with non-uniform power map and integrated microfluidics at the back side of the silicon die is microfabricated. While the proposed silicon-based microfluidic cooling is shown to provide thermal benefits, the silicon Bosch process introduces a number of challenges on a fully processed CMOS wafer, in particular introducing crystalline defects, reducing silicon volume and thus increasing wafer warpage. As an alternative, a novel metal additive manufacturing technology is developed as a key enabler for microfabricating a metallic microfluidic heatsink at the die-level and wafer-level. As a result, we demonstrate additively manufactured 200 µm diameter copper (Cu) pillars as the key heat dissipating elements for monolithically integrated microfluidic heatsinks. Lastly, it is discovered that there is a wide need for the scallop-free sub-micron deep silicon etching process that was developed for the high-density 3D-IC project. By leveraging this enabling process, a lab-on-chip device is microfabricated to study, for the first time, bio-physical interactions of red-blood-cells (RBCs) with their surrounding environment in vitro.
