*********************************
There is now a CONTENT FREEZE for Mercury while we switch to a new platform. It began on Friday, March 10 at 6pm and will end on Wednesday, March 15 at noon. No new content can be created during this time, but all material in the system as of the beginning of the freeze will be migrated to the new platform, including users and groups. Functionally the new site is identical to the old one. webteam@gatech.edu
*********************************
“Development of Multi-Functional Structures for Small Satellites”
Terry Stevenson
Friday March 30, 2 pm
MK 317
Miniaturized electronics have allowed small, volume-constrained satellites, like CubeSats, to perform functions that were previously only possible with larger spacecraft. In contrast to typical space missions, many CubeSats are more limited by available volume than by mass. The use of advanced manufacturing techniques, particularly 3D printing, allows more efficient use of this available volume. Hollow elements of the structure can be used to store and transport fluids without requiring additional piping. In this way, the structure of the satellite can become multifunctional; it still provides structural support, but can also encompass a propulsion or thermal control system.
This concept was applied to produce a propulsion system for the BioSentinel 6U CubeSat. By printing the system from a ceramic-like material, the propellant tanks are able to fill more of the available volume than would have been possible with conventionally produced parts. Incorporating the nozzles and piping into the structure also reduces the number of pressure seals required. The BioSentinel thruster has been manufactured and tested, and will launch with the first flight of SLS in 2020. This technology was also applied to design a CubeSat structure that is entirely 3D printed, and incorporates a propulsion system and torque-free open loop thermal relief system into a metal structure. This improves the maneuverability of the spacecraft while also increasing volume efficiency. Finally, these techniques were applied to design a printed structure for a Venus atmospheric sampling probe, called Cupid’s Arrow. The probe has an integrated propulsion system, and a separate fluid path for collecting and storing atmospheric samples. This development of multifunctional structures improves the state of the art in small satellite structures and enables more volumetrically efficient space missions.
Committee Members:
Dr. Glenn Lightsey (Advisor), Professor, Georgia Tech Aerospace Engineering
Dr Brian Gunter, Assistant Professor, Georgia Tech Aerospace Engineering
Dr Claudio Di Leo, Assistant Professor, Georgia Tech Aerospace Engineering
Mr John Baker, Planetary Smallsat Office, Jet Propulsion Laboratory
Dr Matthew Sorgenfrei, Intelligent Systems Division, NASA Ames Research Center
