*********************************
There is now a CONTENT FREEZE for Mercury while we switch to a new platform. It began on Friday, March 10 at 6pm and will end on Wednesday, March 15 at noon. No new content can be created during this time, but all material in the system as of the beginning of the freeze will be migrated to the new platform, including users and groups. Functionally the new site is identical to the old one. webteam@gatech.edu
*********************************
Title: Growth, Fabrication, and Characterization of III-nitride Semiconductors for High Performance Ultraviolet Avalanche Photodiodes by Metalorganic Chemical Vapor Deposition
Committee:
Dr. Russell Dupuis, ECE, Chair , Advisor
Dr. Shyh-Chiang Shen, ECE
Dr. Douglas Yoder, ECE
Dr. Rao Tummala, ECE
Dr. Jae-Hyun Ryou, ME
Abstract:
The objective of this research is to develop high-performance III-nitride-based ultraviolet (UV) avalanche photodiodes (APDs) with high optical gain using metalorganic chemical vapor deposition (MOCVD) system. However, the realization of high-performance UV-APDs has been hampered by high dislocation densities originating from heteroepitaxial layer grown on the lattice-mismatched substrates, resulting in higher dark current density, device size limitation, and device failure by microplasma formation as well as low yield and non-uniformity in an array format. To achieve high-performance UV-APDs and arrays, material growth on bulk GaN substrates with low dislocation density, sophisticated device fabrication process including low-damage etching and high-quality dielectric passivation, and new UV-APD structure by employing impact-ionization engineering were discussed in this research. The major aims of the research are as follows: 1) to improve characteristics of Al0.05Ga0.95N p-i-nUV-APDs 2) to demonstrate uniform and reliable GaN p-i-n UV-APD arrays with large detection area 3) to demonstrate GaN p-i-p-i-n separate absorption and multiplication (SAM) UV-APDs.
